Experimental Rubber Mixer

Experimental Rubber MixerOne-Stop Procurement: Laboratory vulcanizing machines, internal mixers, open mills, extruders, film blowing machines, cast film machines, melt extrusion spinning machines, meltblown fabric machines, sheet extrusion machine design, processing, and custom manufacturing!

Dongguan JiuTong Machinery Co., Ltd. National Unified Service Hotline: 138-2574-4148 Shao Li

HT-25THot PressParameters:

1.Nominal Mold Clamping Force: 25T

2.Temperature Control Range: ≤300℃.

3.Operation Mode: Automatic/Manual  Dual Use  Backup operation panel for use in case of emergency failure;

4.Temperature Control Accuracy: +2℃; (Each panel independently displays temperature values)

5.Heating Method: Electric Heating

6.Hot Platen: 300×300 (mm); Uses high-strength, specialized cast thermal conductive plates for vulcanizing machines. High hardness, excellent closing parallelism accuracy, fast heat conduction, rapid cooling; Resistant to strong, prolonged pressure and not easily deformed.

7.Cold Platen: 300×300 (mm).

8.Closing Gap: Fully closed state

9.Closing Accuracy: ≤0.20mm

10.Closing Speed: 5mm/min, can be adjusted as needed during the pressing process.

11.Closing Direction: Bottom to top

12.Platen Spacing: 150 mm

13.Pressure Accuracy: ≤5%.

14.Pressure Holding Time: 30 minutes;

15.Operation Panel: PLC programming system control, LCD touch screen display; Required pressure, temperature, time, pressure holding, pressure release, and other conditions can be set separately. One-key start, automatically completes program commands, and the mold can be released. The system includes a dual automatic and manual convertible operating system as a backup during operation.

16.Hydraulic System: High-performance hydraulic system; Explosion-proof, stable lifting after startup, low noise, high load-bearing capacity.